|
zaptel_hardware − Shows Zaptel hardware devices. |
|
zaptel_hardware [−v][−x] |
|
−v |
Verbose ouput − show spans used by each device etc. Currently only implemented for the Xorcom Astribank. |
||
|
−x |
Show disconnected Astribank unit, if any. |
|
Show all zaptel hardware devices. Devices are recognized according to lists of PCI and USB IDs in Zaptel::Hardware::PCI.pm and Zaptel::Hardware::USB.pm . For PCI it is possible to detect by sub-vendor and sub-product ID as well. The first output column is the connector: a bus specific field that shows where this device is. The second field shows which driver should handle the device. a "−" sign marks that the device is not yet handled by this driver. A "+" sign means that the device is handled by the driver. For the Xorcom Astribank (and in the future: for other Zaptel devices) some further information is provided from the driver. Those extra lines always begin with spaces. Example output: Without drivers loaded: usb:001/002 xpp_usb− e4e4:1152 Astribank−multi FPGA−firmware usb:001/003 xpp_usb− e4e4:1152 Astribank−multi FPGA−firmware pci:0000:01:0b.0 wctdm− e159:0001 Wildcard TDM400P REV H With drivers loaded, without −v: usb:001/002 xpp_usb+ e4e4:1152 Astribank-multi FPGA-firmware usb:001/003 xpp_usb+ e4e4:1152 Astribank-multi FPGA-firmware pci:0000:01:0b.0 wctdm+ e159:0001 Wildcard TDM400P REV E/F With drivers loaded, with −v: usb:001/002 xpp_usb+ e4e4:1152 Astribank-multi FPGA-firmware LABEL=[usb:123] CONNECTOR=usb−0000:00:1d.7−1 XBUS−00/XPD−00: FXS Span 2 XBUS−00/XPD−10: FXS Span 3 XBUS−00/XPD−20: FXS Span 4 XBUS−00/XPD−30: FXS Span 5 usb:001/003 xpp_usb+ e4e4:1152 Astribank-multi FPGA-firmware LABEL=[usb:4567] CONNECTOR=usb−0000:00:1d.7−4 XBUS−01/XPD−00: FXS Span 6 XPP-SYNC XBUS−01/XPD−10: FXO Span 7 XBUS−01/XPD−20: FXO Span 8 XBUS−01/XPD−30: FXO Span 9 pci:0000:01:0b.0 wctdm+ e159:0001 Wildcard TDM400P REV E/F |