DAHDI_SPAN_ASSIGNMENTS

NAME
SYNOPSIS
DESCRIPTION
SUB-COMMANDS
OPTIONS
CONFIGURATION
ENVIRONMENT
FILES
SEE ALSO
AUTHOR

NAME

dahdi_span_assignments − handle DAHDI spans assignments

SYNOPSIS

dahdi_span_assignments [−v|−−verbose] [−n|−−dry−run] <add|remove|auto> [devpath...]

dahdi_span_assignments [−v|−−verbose] list [devpath...]

dahdi_span_assignments [−v|−−verbose] [−k|−−key key] dumpconfig

dahdi_span_assignments −h|−−help

DESCRIPTION

Channels in DAHDI devices (such as DAHDI PCI cards) are groups to logical units called "spans" (for example: a port in a digital card is a span). When the kernel module parameter dahdi.auto_assign_span is unset, DAHDI devices that register with DAHDI don’t cause their spans to be automatically assigned.

This allows user-space to order DAHDI to assign them to specific span and channel numbers. That way, specific spans on specific DAHDI devices may be assigned with specific span and channel numbers regardless of the registration order of the hardware (or if all hardware is present at all).

dahdi_span_assignments is used to assign those spans or to help creating the configuration file used in their assignment: /etc/dahdi/assigned−spans.conf .

SUB-COMMANDS

There are several sub-commands.

All sub-commands take an optional list of paths to SysFS nodes of devices. If given, the command will only operate on those DAHDI devices. The default is to operate on all devices (which would normally be the sane case when running from the command-line).

add [devpath ...]

Applies to all devices or to those listed on the command line. Parameters are paths (in SysFS) to DAHDI devices with unassigned spans.

The command will assign spans with DAHDI according to configuration in assigned−spans.conf.

If no line matches the span, or if the assignment for it fails (it is not available) it will remain unassigned.

If any of the span settings fails (the span number or range of channels is already in use), the program will print a message, but continue applying the others. In such a case you should fix assigned−spans.conf and re-run add (or run auto to give those channels the first available range and regenerate the file with ’dahdi_genconf assignedspans’).

remove [devpath ...]

Applies to all devices or to those listed on the command line. Parameters are paths (in SysFS) to DAHDI devices with assigned spans.

The command will un-assign them.

auto [devpath ...]

Applies to all devices or to those listed on the command line. Parameters are paths (in SysFS) to DAHDI devices with unassigned spans.

Each span is assigned to first available span number and channel numbers, as if dahdi.auto_assign_span was set. The configuration file doesn’t affect these assignments.

list

List all spans in the system.

dumpconfig

List all assigned spans in the system in a format fit to be used in assigned−spans.conf. Use this to generate a configuration file after you have (automatically or manually) assigned all existing spans.

dahdi_genconf assignedspans uses this command internally.

OPTIONS

−v −−verbose

Verbose output.

−n −−dry−run

Don’t assign / un-assign spans. Only print commands used to do so.

−k key

For dumpconfig − The key by which to identify the hardware in the generated configuration. Legal values:

hwid

Hardware identifier (e.g.: software-readable serial number). This is the default. If the device has no hwid, devpath is used.

location

The location field (file) in the SysFS device node (directory) for the DAHDI device. If not available (typically: DAHDI version <= 2.7.x), devpath is used.

devpath

Path in SysFS to the device node.

CONFIGURATION

/etc/dahdi/assigned−spans.conf is a file with lines specifying assignment of spans.

Empty lines or lines beginning with ’#’ are ignored.

Each line is in the format of:

ID

spanspec ...

The ID field specifies the DAHDI device and the spanspecs define how to assign its spans. A line may have multiple spanspecs in a single line (though dumpconfig generates a configuration with one per line).

Span Identifier
A DAHDI device may be specified either by a hardware identifier (a software readable serial number or whatever) or the location in which it is installed on the system. The former makes it simpler to change connector / slot whereas the latter makes it simpler to replace a unit.

The value in this field is matched (when the commands add and remove) are used) to the following values:

hwid
@
location
devpath

See above for their descriptions. The value may include shell wildcards: *, ? and [], which are used in the match. The values to be matched are first cleaned up: ’!’ is replaced with ’/’ and any character beyond "a−zA−Z0−9/:.−" is removed.

Span Specification
Each line should have one or more span specifications: this is the value used to assign a span with DAHDI in the SysFS interface. A specification has three colon-separated numbers:

rel_span_no:span_no:first_chan

for instance, the following are four span specifications for a quad-E1 device: 1:6:53 2:7:84 3:8:115 4:9:146 occupying spans 6-9 and channels 53-176.

rel_span_no

The relative number of the span in the device. E.g.: port number.

span_no

The desired DAHDI span number. Must be available.

first_chan

The desired DAHDI channel number for the first DAHDI channel in the span. All channels of the span will be assigned following it and hence that space must be available.

ENVIRONMENT

DAHDICONFDIR

The directory in which assigned−spans.conf resides. /etc/dahdi if not overridden from the environment.

DAHDISASSIGNEDSPANSCONF

The path to assigned-spans.conf resides. /etc/dahdi/assigned−spans.conf if not overridden from the environment.

SPAN_ASSIGNMENTS_KEY

The default value for −k . Defaults to "hwid" if not overridden from the environment.

FILES

/etc/dahdi/assigned−spans.conf

The default location for the configuration file.

/sys/bus/dahdi_devices/devices/device

SysFS node for the device. In this directory reside the following files, among others:

location

The value of the device’s location field.

assign_span, unassign_span, auto_assign

Write only files for the operations. Used by add, remove and auto, respectively.

SEE ALSO

dahdi_span_types(8), dahdi_genconf(8), dahdi_cfg(8)

AUTHOR

dahdi_span_assignments was written by Oron Peled. This manual page was written by Tzafrir Cohen. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.