astribank_is_starting − Mark / check is a Xorcom Astribank (xpp) is starting
astribank_is_starting [−d] [−v] [−t timeout] <−a|−r|−w>
astribank_is_starting [−d] [−v]
astribank_is_starting −h
astribank_is_starting is an internal tool used by various xpp scripts to mark that there may be an Astribank device currently initializing, and to check for that mark.
Technically the mark is a SysV semaphore.
−a
Add. Set the mark. Should return 0 unless there’s an error.
−r
Remove. Reset the mark. Should return 0 unless there’s an error.
−ttimeout
Timeout. Set the timeout value for the −w option. Default is 60 seconds.
−w
Wait. Wait for mark to be reset. Should return 0 unless there’s an error.
Without −a or −r: return 0 if the mark has been set, or a non-zero value otherwise.
−d
Print debug information to stderr.
−v
Verbose execution.
−h
Displays usage message.
/proc/sysvipc/sem
If set, the astribank should appear there with the ID 11211168 (0xAB11A0). Naturally the ID (or rather, the usage of a semaphore in the first place) is an implementation detail that may change.
astribank_is_starting is used to mark the fact that an Astribank may be currently reenumerating (technically: distonnecting and connecting as a new USB device) after loading the firmware. Thus the script that loads the firmware (/usr/share/dahdi/xpp_fxloader) uses this utility to set the mark.
The mark is reset by /usr/share/dahdi/waitfor_xpds , which is typically run by the DAHDI init script and waits for all Astribanks to finish loading.
Q: Why do you use a semaphore?
A: because, unlike the filesystem, it is writable at any given time.
Option ordering matter. The −v and −d options should preceed the actions (−a, −r and −w). The −ttimeout option should preceed the −w option.
semctl(3)
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> . Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common−licenses/GPL.